Agora Bismarck - Page 20

03 04
05 06
01 02
Moving around to the front of the bridge deck, fit the
door D4 and the storage unit D2. Again, note the
position of the hinges on the door. Check the fit and
make any necessary adjustments before gluing in
place.
At the rear of the bridge deck 26-01, on the port side,
fit door D5, ensuring the hinges are positioned as
shown.
A similar door, D3, is fitted to the starboard side of
bridge deck 26-01, near the rear of the deck. Note
how the hinges are on the right.
On the angled wall on the starboard side of bridge
deck 26-01, fit door D10 and storage locker D8. These
are mirror images of the parts fitted in step 2.
Take the superstructure deck assembly from the
previous stage. The first fire hose E1 is fitted to the
forward port side, on part 21-06. Check the fit and
glue in place as shown.
Fire hose E3 is fitted to the forward port side of
deck section 24-01. Check the fit and glue in
place as shown.
2601
D4
D2
2601
D5
2601
D3
2601
D8
D10
2106
E1
2401
E3
02. FITTING THE FIRE HOSES E1 – E4
20
20
AGORAMODELS BISMARCK
PB
AGORAMODELS BISMARCK