Agora Bismarck - Page 28

To Next Page

To Previous Page

2805

Completed work

We have fitted a range of accessories, including

the port and starboard navigation lights, to the

bridge deck.

Identify parts H1 and H2 and cut them from the

frame. Check the fit further aft on the port side of

the bridge deck and stick in place as shown.

Identify parts H8 and H5, cut them from the frame

and smooth any rough edges. Check the fit on the port

side of the bridge deck and stick in place as shown.

Identify the fixing point for part H4 on the starboard

side and check the fit. Apply a little superglue to the

pegs on part H4 and fix in place as shown. Cut parts

H7 and H6 from the frame and use a little superglue

to fix in place on the starboard side of the forward

part of the bridge deck as shown.

Cut part H4, the starboard navigation light housing,

from the frame. Fit the green LED cover 28-05 into

the recess in part H4.

Cut parts H1 and H2 from the frame and identify the

fixing points on the starboard side of the bridge deck.

Apply a little superglue to the pegs and fix in place as

shown.

AGORAMODELS BISMARCK