AGPtek A11 - Power on and off

Power On and Off
1. Power On: Slide the power switch to“On”position.
If the switch already at “On” position, just press the
play button for 3 seconds.
2. Power Off:
1) Slide the power switch to “Off” position.
2) Press play button for 3 seconds when the switch
at “On” position.
Note:
1) Please put the power button to “Off” position if
you won’t use it for a long time.
2) If you cannot switch on the recorder, please make
sure the slider switch is on the right side.
Charging the Recorder
1) Use only a 5V/500mAh charger for charging.
2) Charge by computer
Plug one end of the micro USB cable into the USB
port of a computer, the other end to the port on
your device. While it is fully charged, disconnect the
cable from your device by pulling it straight outward.
Lock Screen
Slide the button on the right(from down to up) to lock
the screen. Repeat to unlock.
Volume Adjustment
When it ’ s on audio/video playing interface, click or
hold button ▲/▼ to increase/decrease the volume.
2