EasyManua.ls Logo

AGPtek S1B - Page 5

AGPtek S1B
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
About the Rechargeable Battery & Charging
1. Regarding the lithium rechargeable battery:
(1) This Bluetooth Speaker has an internal, non-user replaceable battery. For best results,
the first time you use this Bluetooth Speaker, let it charge for about 2~3 hours or until
the battery icon shows the battery is fully charged.
Note: The power bar may be displayed incorrectly. This is normal. In order to
get a full charge, please charge for at least 3hrs until it shows in full
charge level.
(2) For maintain the battery life and performance, if speaker isn’t used for a while, the
battery might need to be recharged. Charge the battery at least once every month.
2. To recharge the built-in battery:
(1) Connect the Micro USB socket with the PC’s USB port Power or DC 5V, 500mA
through USB cable.
(2) Disconnect the USB cable when it is done.
In Charging
Empty/Low battery
Full battery
Note: Please tighten the Rubber Seal Cover
after charging to prevent water from
penetrating into the speaker.