Need help?Do you have a question about the AGREX KYLO System and is the answer not in the manual?
Details the physical components and labels of the control unit's front panel.
Ensures proper connection before operating the system.
Instructions for powering the system on and off using the ON/OFF button.
Explains how side buttons perform functions based on displayed icons.
Describes how displayed information and commands vary by selected operating mode.
Configures system settings like operating mode, error limits, and field data.
Manages job data including name, statistics, spreading width, and fertilizer type.
Controls the rapid emptying function of the fertilizer hopper.
Manages loading fertilizer into the hopper, with options for weighing systems.
Sets the weight of fertilizer loaded when no on-board weighing system is present.
Displays and manages loaded fertilizer weight with an on-board weighing system.
Displays system messages and alarms during operation.
Accesses detailed system configurations, diagnostics, and calibration options.
Provides system status, sensor readings, and error detection.
Manages fertilizer types, specific weights, and calibration settings.
Allows selection and configuration of measurement units for system parameters.
Configures tractor settings, including speed detection and calibration.
Configures system alarms for speed and memory status.
Manages hopper weight display, calibration, and partial weight.
Displays firmware versions, module information, and memory status.
Sets the system clock, date, and automatic time update.
Adjusts display contrast, brightness, button tones, and language.
Accesses diagnostic data for manufacturer use.
Navigates back to the main menu from advanced settings.
Returns the display to the main operating page.
To Next Page
General