Agri-Fab 45-0343 User Manual

REF. PART QTY. DESCRIPTION
NO. NO.
1 64650 1 Spring Mount Frame Assem.
2 46761 7 Spring Tine
3 48098 1 Gauge Wheel
4 43085 7 Hex Bolt, 5/16-18 x 1-1/2"
5 43081 2 Washer, 5/16"
6 43070 14 Washer, 3/8"
7 47810 7 Nylock Nut, 5/16-18
8 48812 2 Clevis Pin, 5/16" x 1-3/8"
9 47413 2 Clamp
10 43055 2 Hair Cotter Pin, 3/32"
11 44025 1 Hex Bolt, 1/2-13 x 3-1/2"
REF. PART QTY. DESCRIPTION
NO. NO.
REPAIR PARTS FOR mODEl 45-0343 DETHATCHER FOR SWEEPERS
12 R19171616 2 Washer, 1/2"
13 43019 1 Jam Nut, Plain 1/2-13
14 48115 1 Jam Nut, Nylock 1/2-13
15 48813 2 U-Bolt, 1/4-20
16 47189 4 Hex Nut, 1/4-20
17 44481 2 Vinyl Cap
18 48811 2 Hook, Transport
19 25054 2 Bracket, U-Bolt Clamp
48824 1 Owner's Manual
1
2
3
4
6
5
7
8
9
10
12
11
12
13
15
19
17
18
16
19
15
9
17
14
6

Agri-Fab 45-0343 Specifications

General

Brand	Agri-Fab
Model	45-0343
Category	Tiller
Language	English

Summary

Repair Parts for Dethatcher Model 45-0343

Spring Mount Frame Assembly

The main structural component that mounts the spring tines for the dethatcher.

Spring Tine

Flexible metal tines that perform the dethatching action on the lawn.

Gauge Wheel

Wheel that supports and controls the working depth of the dethatcher.

Hex Bolt 5/16-18 x 1-1/2"

Standard hex bolt used for various assembly points in the dethatcher.

Washer 5/16"

Flat metal ring used with 5/16" fasteners to distribute load.

Washer 3/8"

Flat metal ring used with 3/8" fasteners to distribute load.

Nylock Nut 5/16-18

Self-locking nut with a nylon insert to prevent loosening on 5/16-18 threads.

Clevis Pin 5/16" x 1-3/8"

Pin with a head and hole for a cotter pin, used for securing moving parts.

Clamp

A component used to secure or hold parts together in the assembly.

Hair Cotter Pin 3/32"

U-shaped wire fastener used to secure clevis pins and prevent them from falling out.

Hex Bolt 1/2-13 x 3-1/2"

A larger hex bolt used for attaching the main components of the dethatcher.

Washer 1/2"

Flat metal ring used with 1/2 inch fasteners to distribute load.

Jam Nut Plain 1/2-13

Locking nut with a chamfered end to prevent loosening on 1/2-13 threads.

Jam Nut Nylock 1/2-13

Locking nut with a nylon insert for 1/2-13 threads to prevent loosening.

U-Bolt 1/4-20

U-shaped bolt with threads used for securing tubular frame members.

Hex Nut 1/4-20

Standard nut used with 1/4-20 threaded fasteners.

Vinyl Cap

Protective cap made of vinyl, likely for covering ends or fasteners.

Hook, Transport

Accessory hook designed for transporting or storing the dethatcher.

Bracket, U-Bolt Clamp

Bracket that works with U-bolts to secure components.

Owner's Manual

Document containing operating instructions and maintenance information.