AgriEid Cattle Scales User Manual (English)

To Next Page

1. AgriEid Cattle Scales have been pre-calibrated in the factory for a

maximum weight reading of 1500kg for your convenience.

2. Bolt the load cells to your platform as per the following instructions

and switch on the load indicator to check the initial weight reading.

3. If you need to disconnect the cables to install the load cells, ensure

the wiring is replaced in the same order and configuration.

4. If the weight reading is not correct in your initial test (stand on the

scales and weigh yourself) follow the simple instructions in this

document to quickly calibrate the scales and get operational.

Equipment Supplied: AgriEid Cattle and Livestock Digital Scales

(4) x Load Cells with 3.5m cable to connect load cells to junction box

(4) x Load Cell Spacers + (8) Bolts with washers

(1) x Junction Box

(1) x Quick Connect Cable (Junction Box to Indicator)

(1) x Digital Weight Indicator

Need help?

Do you have a question about the AgriEid Cattle Scales and is the answer not in the manual?

AgriEid Cattle Scales Specifications

General

Lists all components included with the AgriEid Cattle and Livestock Digital Scales for setup.

Details on building a sturdy platform and securely mounting the load cells using spacers and bolts.

Explains how to connect the load cell cables to the junction box matching their platform positions.

Introduction to calibrating the indicator, including button functions for navigation and entering menus.

Steps for setting up the digital indicator, including units (kg) and decimal place configuration.

Procedure for performing zero calibration and weight calibration using test weights on the platform.

Advice on ensuring platform stability, minimizing movement, and selecting appropriate test weights for calibration.

Information on accessing further support, including website resources and email for technical questions.