保修事项
Warrantyterm
发动机和变速箱壳体连接螺栓、螺母
Bolt connecting engine with gearbox, nut
M16x1.5
200～260
变速箱和后桥箱连接螺栓
Bolt connecting gearbox with rear axle
M12
90～110
变速箱和后桥箱连接螺栓
Bolt connecting gearbox with rear axle
M16x1.5
200～260
发动机与离合器壳体
Engine and clutch housing
M8
25～30
大圆锥齿轮固定螺栓
Fixing bolt of the large bevel gear
M14x1.5
160～200
驱动轴壳体与后桥壳体连接螺栓
Bolt joining the housing of drive shaft and that of rear axle
M14x1.5
160～200
驱动轮轮毂与辐板连接螺栓
Bolt joining the hub and web of driving wheel
M18x1.5
397～457
前轮轮毂与辐板连接螺栓
Bolt joining the hub and web of front wheel
M16x1.5
200～260
托架与发动机连接螺栓
Bolting connecting the engine to the bracke
M16
182～245
提升器壳体与后桥壳体连接螺栓
Bolt joining the housing of lifter and that of rear axle
M12
95～110
油缸缸头与提升器壳体连接螺栓
Bolt joining the oil cylinder end and the housing of lifter
M18x1.5( 老 结 构 Old
structure)
M20x1.5( 新 结 构 New
structure)
260～290
396～465
力调节支座与后桥壳体连接螺栓
Bolt joining the force-adjusting base and the rear-axle
housing
M12
90～110
左右转向臂螺母
Nuts of the left and rear steering arms
M14x1.5
140～205
转向油缸两端固定销螺母
Pin-nut fixing both ends of the steering oil cylinder
M18x1.5
300～330
方向盘与转向柱连接螺母
Nut joining the steering wheel and the steering column
M16x1.5
130～150
前后摆销支座与前托架连接螺栓
Bolt joining the swing-pin base and the front bracket
M16
182～245
重要事项：
IMPORTANT:
拧紧拖拉机主要螺栓、螺母时，必须使用扭力扳手。
When tightening the major bolts and nuts on the tractor, torque wrenches must be used.
To Next Page
Loading...
