Agromatic N Series - User Manual

To Next Page

















Keep for future reference!





Main Page

Table of Contents3
Introduction7
Notes and Signs Used in this Document8
Symbols Used in this Manual9
Warranty and Liability9
Safety11
General Safety Instructions11
Intended Use12
Residual Risks12
Hazards from Electrical Energy13
Danger from Moving Parts14
Protection Classes IP54 (Standard), IP65/IP66 (Option)15
Personal Protective Equipment16
Notes for Emergencies17
Obligations of the Owner/Lessor18
Responsibilities19
Requirements Imposed on the Personnel19
Obligations of the Personnel20
Qualifications Required of the Personnel20
Product Description21
Product Series21
Overview21
Series N (Rotary/Part-Turn Actuator)21
Series K, KA, V (Linear Actuators)22
Weight23
Functional Description23
Dimensions23
Technical Data23
Housing24
Drive Motor24
Functional Data25
Airborne Noise Emission26
Nameplate27
- Transportation and Storage29
- Acceptance Inspection by the Receiver29
- Packaging, Insulation29
- Transport Instructions30
- Interim Storage30
- Assembly31
- General Notes32
- Installation34
- Series N34
- Series K, KA38
- Series V42
- Installing the Handwheel (Option)44
- Electrical Connection45
- Determining the Direction of Rotation47
- Schematic Diagram for Alternating Current50
- Schematic Diagram for Three-Phase Current51
- Schematic Diagram for Direct Current51
- AC Schematic Diagram with Service Switch (Option)51
- AC Schematic Diagram for Parallel Operation (Option)52
- Setting the Position Switches52
- Control Cam Shapes and Switches53
- JNO: Adjustable Cam to be Set from above54
- JNS: Sideways Adjustable Cam56
- Brass Control Cam (Option)58
- Force-Sensitive Switch (Not for Series N)60
- Force-Sensitive Limit Switch61
- Force-Sensitive Auxiliary Switch61
- Connecting and Adjusting the Potentiometer (Option)62
- 2-Wire Current Output 4 E 20Ma (Option)64
- Anti-Condensate Heater (Option)65
- Installing the Hood65
- Operation67
- Auxiliary Functions (Optional)68
- Handwheel68
- Gearbox Decoupling (Series N)70
- Mechanical Limitation of the End Position with Force-Sensitive Switch- off (Option for Series K and V)72
- Maintenance and Repair75
- Safety Instructions75
- Maintenance Work77
- Maintenance Intervals77
- Cleaning the Actuator (All Series)78
- Series N78
- Series K79
- Series KA80
- Series V81
- Leak Test82
- Visual Inspection82
- Electrical Inspection (All Series)83
- Spare Parts84
- Malfunctions85
- Safety Instructions85
- General Notes85
- Repairs86
- Decommissioning, Disassembly87
- Putting the Actuator out of Operation87
- Dismantling and Disposing of the Actuator88
- Appendix89
- Certificates89
- Index95

Need help?

Do you have a question about the Agromatic N Series and is the answer not in the manual?

Agromatic N Series Specifications

General

Brand	Agromatic
Model	N Series
Category	Controller
Language	English

Related product manuals

Agromatic VK Series

98 pages

Agromatic N Series - User Manual

Table of Contents

Agromatic N Series Specifications

Related product manuals