AGT INDUSTRIAL AGT-ST4040C - User Manual

1
A G T - S T 4 0 4 0 C 4 0 F t x 4 0 F t C o n t a i n e r R o o f S h e l t e r
 Please read the product manual completely before assembly.
 Check against the parts list to make sure all parts are received.
 Wear proper safety goggles or other protective gears while in
assembly.
Missing parts or questions on assembly?
Pleasecontact sales@agrotkindustrial.com
https://www.agrotkindustrial.com/
sales@agrotkindustrial.com https://www.agrotkindustrial.c om/
WARNING
PRODUCT MANUAL
AGT

Summary

Main Specifications and Product Overview

Main Specifications

Details the overall assembled size, width, length, and ridge peak height of the shelter.

Prior to Assembly

Highlights essential safety gear, regulations, and operational procedures before installation.

Installation Guide

Step 1: Site Selection and Review

Guidelines for choosing a solid, level ground area and reviewing the structure.

Step 2: Container Placement

Instructions for positioning containers parallel and at the correct width apart.

Step 3: Truss Assembly

Details on assembling front, rear, and middle trusses using specified bolts.

Step 4: Erecting Trusses

Methods and safety precautions for lifting and securing the assembled trusses.

Step 5: Roof Cover Installation

Instructions for installing the roof cover on a windless day.

Step 6: Cover Tensioning

Procedure for tensioning the roof cover using tubes, ratchets, and tie-down straps.

Post-Installation Procedures and Care

Periodic Inspections and Upkeep

Guidance on regular checks of components, connections, and general shelter maintenance.

Snow Load Management and Environmental Care

Recommendations for removing snow and maintaining a dry environment to protect the shelter.

AGT INDUSTRIAL AGT-ST4040C Specifications