To Next PageTo Next Page
Need help?Do you have a question about the AGT AGT-PD680-PZ and is the answer not in the manual?
General| Brand | AGT |
|---|---|
| Model | AGT-PD680-PZ |
| Category | Industrial Equipment |
| Language | English |
Manual content safety, operation, and maintenance instructions, excluding disassembly.
Rules for safe operation of the Post driver hammer, including legal compliance and understanding equipment manuals.
Lists key technical specifications such as operating weight, flow rate, pressure, and impact rate for the Post driver hammer.
Details the construction of the Post driver hammer, explaining the function of key components like the back head, valve, and piston.
Provides instructions and precautions for removing and installing the post driver tool, including checks for wear and lubrication.
Outlines the manual greasing system, frequency, amounts, and lists recommended greases for the Post driver hammer.
Emphasizes the need for dedicated hydraulic lines and checking base machine conditions before installation.
Details the step-by-step procedure for operating the Post driver hammer, including positioning the pile and driving it.
Highlights critical precautions during operation, such as stopping for vibration, avoiding blank hammering, and proper engine speed.
Details periodic maintenance tasks required every 100 hours, including tool inspection, bushing check, and replacing worn parts.
Provides a table outlining daily inspection items, points to check, and remedies for common issues like loose bolts and leaks.
Emphasizes regular inspection and maintenance, recommending consultation with service stations or dealers for optimal performance.
Explains tool wear, sharpening, and the process for replacing the tool bush when it exceeds the wear limit.
Addresses the importance and safety precautions related to Nitrogen (N2) gas pressure in the back head of the post driver hammer.
Lists the necessary tools for charging Nitrogen gas into the back head, including cylinder, adaptors, hose, and charging kit.
Provides step-by-step instructions for inspecting the Nitrogen gas pressure in the back head and adjusting it if necessary.
Guides the user through the process of connecting the charging kit and filling the back head with Nitrogen gas.
A guide to troubleshooting common operational issues like 'No blow out', 'Low impact power', 'Irregular impact', and 'Bad tool movement'.
Identifies causes and remedies for gas leakage from various points of the post driver hammer, such as the charging valve and cylinder.
Provides a chart to diagnose and address oil leakage from different areas of the post driver hammer, including seals and fittings.
Details the information required for the Delivery and Installation Card, covering both the machine and the post driver hammer.
A comprehensive list of main parts for the post driver hammer, referenced with part numbers and quantities.
Exploded view illustrating the components of the hydraulic power unit for the post driver hammer.
Detailed parts list for the Hydraulic Power Unit, including part numbers, descriptions, and quantities.
