Do not use the bucket operation device to rotate the frame when raising it in front
of the mini-excavator (there is no rotation on the mini-excavator).
Otherwise, the load will be concentrated on the caterpillar band, and the single
point is to twist the track, resulting in rapid damage and falling off of the caterpillar
band.
Prevent the track from falling, so that the rubber caterpillar band will be strongly
impacted.
When the rubber track is stored for a long time (three months or more),
Please store it indoors where it is not exposed to direct sunlight or rain.
Hydraulic breaking hammer
For the operation of the hydraulic breaking hammer, refer to the manual of the
hydraulic breaking hammer provided separately by us.
When installing components such as hydraulic breaking hammer, tilt bucket or
grab bucket, it is ensured that they are suitable for the mini- excavator model being
used. When selecting components, please contact your sales or after-sales service
personnel.
The hammer head shall be perpendicular to the working surface for breaking
operation.
To Next Page
Loading...