!
Remove the protective film from the two-sided tape applied to the curved surface of the adaptor.
Glue the unit (keypad + adaptor) to the helmet and keep pressed together for about 10 seconds.
NB: The design of the keypad does not guarantee that it will work reliably if it is removed and then
fitted to another helmet.
Before using a helmet fitted with the SHARE EASY FULL FACE system on the road make sure
that ALL the cables are outside the chin strap and are suitably concealed behind the padding.
Make sure that there are no loose cables or components that might cause bother while you are
riding.
We recommend that you wait several hours before using the helmet to allow the adhesive to set
properly.
SHARE EASY FULL FACE has been designed to be safe and not to affect the normal fit of the
helmet.
!
REAR SHARE EASY
FITTING INSTRUCTIONS FOR: NUMO, NUMO EVO, COMPACT
Communication components supplied:
! Communication system
! Adaptors
! Velcro for attaching earpieces
! Velcro (male and female) for attaching the cases
! Battery charger
! USB cable
! AUX-IN cable
To Next Page
Loading...
Need help?
General