Ahlborn ALMEMO 2690-8A - 1. OPERATING CONTROLS; 1. Meas. inputs M0 to M4; 2. Output sockets A1, A2; 3. Connector socket DC 12 V

2
1. OPERATING CONTROLS
(1) Meas. inputs M0 to M4
M0 ... M4 for all ALMEMO-Sensors
M10...M34 15 additional channels
(2) Output sockets A1, A2
A1 Interfaces USB(ZA1919-DKU)
Interface V24 (ZA 1909-DK5)
Fiber optics V24 (ZA 1909-DKL)
Ethernet (ZA 1945-DK)
RS 422 (ZA 5099-NVL/NVB)
Analog output 2 (ZA 1601-RK)
A2 Network cable (ZA1999-NK5/NKL)
SD card connector (ZA 1904-SD)
Trigger input (ZA 1000-ET/EK)
Relay outputs (ZA 1000-EGK)
Analog output 1 (ZA 1601-RK)
(3) Connector socket DC 12V
Mainsadapter(ZA1312-NAx,12V, 1,5A)
USB Cable (ZA1919-DKU5, 5V 0.4A)
DC-Cable isolat. (ZA2690-UKx, 10-30V)
(4) Sleep-LED
(5) LCD display
Status line:
C
Cont. measuring point scan
© , ll
Measurement Start, Stop
REC
Memory record
COM
Output of meas. values
l©, ©l
Meas. start, end programmed
R01
Alarm relay status
* , *
Light on, pause
Battery operation/charge status
13 lines for functions
Function of keys F1, F2, F3, F4
(6) Control keys
ON , <POFF> Switch device on, off
 ,  ,  Function selection
F1 ... F4 Function keys (soft keys)
PROG Programming
 ,  ,  Data input
<ESC> Function abort
  Last measuring menu
(7) Rubber shock absorber
Back of unit:
(8) Battery box
3 Mignon Alkaline Batteries
or 3 Mignon NiCd/NiMH Accumulators
(9) Stand for stand and hang up
(for opening out from 90° to 180°
please press the stand together!)