To Next PageTo Next Page
Need help?Do you have a question about the Ahuja SWX-200P and is the answer not in the manual?
General| Power Output | 200W RMS |
|---|---|
| Input Sensitivity | 0.775V |
| Impedance | 4 Ohms |
| Enclosure Type | Bass Reflex |
| Input Impedance | 10k ohms |
| Power Supply | AC 220-240V 50/60Hz |
| Input Connectors | XLR |
Includes important warnings, cautions, and explanations of safety symbols for user protection.
Covers safe handling of power, cords, operation in different environments, and fuse replacement.
Details about operational switches, volume adjustment, crossover selection, and reset buttons on the rear panel.
Explanation of status LEDs including Power, Clip, and Fault indicators on the rear panel.
Description of input jacks for audio signals and the AC power inlet with fuse on the rear panel.
Explains how to connect audio sources to the subwoofer's 200mV and 1V inputs using various setups.
Recommendations for positioning the subwoofer to maximize bass response and achieve optimal results.
Instructions on powering the unit and adjusting the subwoofer's output volume relative to the system.
Guidance on selecting the appropriate crossover frequency based on satellite speaker capabilities.
Explanation of how subwoofer bandwidth and output level adjustments impact overall system performance.
Detailed guide for setting up a stereo music system using the subwoofer with CD players and cassette recorders.
Instructions for implementing a two-zone music system with multi-zone amplifiers and ceiling speakers.
Guide for configuring a music system for large areas using PA amplifiers and high-output speakers.
Steps for integrating the subwoofer into a 5.1 home theatre system with an AV receiver and multiple speakers.
Technical overview illustrating the signal flow and internal components of the subwoofer system.
Detailed performance metrics, power ratings, dimensions, and electrical characteristics of the subwoofer.
