AI DRONE WASP - Remote Control Setup and Safety; Remote Control Battery Guidelines; Remote Control Battery Specifications; Installing Remote Control Batteries

REMOTE CONTROL SAFETY INSTRUCTIONS
- We recommend new alkaline manganese batteries for the remote control.
One time use batteries and rechargeable batteries could also be used
for the remote contol. The combination of dierent types of batteries
as well as new and used batteries should be avoided. Only recommended
batteries or those of an equivalent type should be used.
- As soon as the remote control no longer functions reliably, new batteries
should be inserted and/or the batteries should be charged. Batteries
must be inserted according to the correct polarity (+) and (-). Do not use
damaged batteries.
- Rechargeable batteries must be removed from the remote control prior
to recharging. Rechargeable batteries should be charged under the
supervision of an adult.
- The connection terminals must not be short-circuited.
BATTERY REQUIREMENT FOR THE REMOTE CONTROL
Power Supply : DC 9 V
Batteries: 6 X 1.5V “AA” (Not Included)
INSERTING THE BATTERIES FOR THE CONTROLLER
- Open the battery compartment cover as shown in A1 by unscrewing
the battery compartment securing screw in anti-clockwise motion.
- Insert the batteries as shown in A2.
- After inserting the batteries, close
the battery compartment cover by
screwing clockwise .
A1 A2
2