Need help?Do you have a question about the AIC J4078-01 and is the answer not in the manual?
General| Product Type | Server |
|---|---|
| Memory Type | DDR4 ECC Registered |
| Drive Bays | 4 x 2.5" Hot-swap |
| Processor | Dual AMD EPYC™ 7003/7002 Series Processors |
| Storage | SAS/SATA/NVMe |
| Power Supply Options | Redundant |
| Operating System Support | Linux, Windows Server |
Provides detailed technical specifications of the J4078-01 JBOD, including general, drive, management, and environmental details.
Provides step-by-step instructions for installing and removing hard disk drives and their trays.
Guides users through the safe removal and installation of the power supply unit module.
Explains how to remove and install the fan modules within the JBOD enclosure.
Describes the procedure for removing and installing expander modules.
Guides on configuring expander settings using Java SOL, covering various methods and commands.
Explains how to initiate and use Java SOL for expander configuration.
Provides detailed commands and procedures for configuring expander settings via a serial CLI.
Step-by-step guide for setting up T10 zoning for drive access control.
Steps to configure zoning options for HUB and EDGE expanders.
Configuration for zoning wide ports on HUB expanders.
Explains SCSI Enclosure Services (SES) features for monitoring and status reporting.
Provides an overview of device status, sensor monitoring, and event logs via the web interface.
Covers various configuration settings for the device, including network and system parameters.
Guides on updating the BMC firmware through the web interface.
Step-by-step instructions for updating BMC firmware via the web UI.
Instructions for updating firmware and manufacturing data for expander modules.
To Next Page