o
O
o
3
4
5
6
7
8
Set the end of juice net with large hole in the screw propeller from the
tail, and align the three buckles of juice net with three card slots in the
container for juicing and push into. (This juice net is used only
coordinating with the back juicing button for juicing)
Stagger the three buckles on the cover of the container for juicing and
the three buckles on the container for juicing, push into horizontally,
and then rotate counterclockwise to tighten the cover of the container
for juicing and the container for juicing securely.
Put thejuice glass near the body of machine, and align the opening of
the cup with the bottom of juice nozzle of the container for juicing.
Put the pomace cup under the pomace outlet, near the juice glass
(keeping the high-end surface close to the pomace outlet is more
conducive to taking the pomace).
Put the tray on the upper end of feeding barrel of the container for
Jlllclng.
The tray can facilitate the feeding of material, especially when
processing the food material with small particles, such as grapes and
strawberries.
Switch on and ready to work. (Ensure the switch is in off statebefore
switching on)
6
To Next Page
Loading...
