aidapt VY428 - ASSEMBLY and INSTRUCTIONS (Continued)

ASSEMBLY AND INSTRUCTIONS (continued)
5. Take the longer strap and remove the female buckle from
the end (see g. 6)
6. Attach the long strap to the long bar (see g. 2) by feeding the looped end of the strap
through the D ring and pull the strap tight (see g. 7, 8, 9 & 10)
7. Reattach the female buckle to the looped end of the long strap (see g. 11, 12 & 13)
ENSURE THAT THE TEXTURED CENTRE PIN OF THE BUCKLE IS FACING UPWARDS AS
THIS PREVENTS THE STRAP FROM SLIPPING WHEN THE TRANSFER AID IS IN USE
(see g. 11 & 12)
g. 6
g. 7
g. 11 g. 12 g. 13
g. 8
g. 9
g. 10
Looped end