aidapt VY428S - ASSEMBLY INSTRUCTIONS (Continued)

3 Ver 1 01/2015
ASSEMBLY INSTRUCTIONS (Continued)
3. Insert extension poles (D) into the arms of piece C (see fig. 4) and slide in until the catches align with
the holes (see fig. 5).
4. Attach piece E onto extension
poles (D) (see fig. 6) and slide until
the catches align with the holes
(see fig. 5)
fig. 4
fig. 6
5. The catches can be depressed to
allow piece E to be moved depending
on the width of the bed (see fig. 7)
fig. 7
fig. 5