Quick Installation Guide
N300 WiFi Range Extender
Repeater Mode
AP Mode
2 Working Modes
This device supports: Repeater Mode, AP Mode. You just need to select one mode.
Repeater Mode: Extend existing wifi range.
AP Mode: Create a new wifi access point for more devices.
If you are not sure which mode to select, please view details on Q&A part or contact with our professional engineers
for help.
Default Parameters:
Default SSID: Wireless-N-c
Default IP Address: 192.168.10.1
Login Password: admin
Power On & Enter into admin Page
Plug the device into socket next to your main router, wait for 15 seconds, the wifi repeater will start up entirely.
Light status after activated: : Solid on Blinking
To Next Page