Manual Instruction of Timer Socket
1
Product name: One-week Mechanical Indoor Timer Socket
Barcode: 8433325179502
Plug parameter: 230V/50Hz16(2)A
Picture:
Product introduction
1. There is a mode setting slider on the right side of the product. To activate the socket at
regular intervals, toggle the slider so that the icon is visible, otherwise toggle it
backwards so that the icon is visible, indicating that the socket is always powered on.
(As in fig. 1)
2. When the socket is in timer mode, the power indicator lights up. (As in fig. 2)
3. Above the socket is a time dial indicating the seven days from Monday to Sunday. The 24
hours per day are divided into 12 compartments, each with a 2-hour interval for the dial
(see fig. 3). Press = on, pop up = off.
4. The time dial can only be turned in a clockwise direction, not counterclockwise.
5. The small triangle is set to point to the current time.
To Next Page
Need help?
General