The table lamp operating instructions
Connect the LED control device(power adapter) to the table lamp and then turn it on.
When using this lamp for the first time, connect the DC plug to the DC socket of the lamp, then plug the power adapter into the suitable
power socket. The lamp turns on when you touch the control panel. You can also adjust the brightness and color temperature of the lamp.
The color temperature adjustment key: color temperature adjustment by short button. The lamp can be used with three different color
temperatures.
The brightness adjustment key: the short touch adjustment key, current mode is[high brightness-medium brightness-low brightness]
,and it will automatically repeat the three modes in turn. Long touch adjustment key, current mode is stepless dimming.
The Power key: Touch the power key to control the table lamp on/off. And it can remember the color temperature and brightness
before lamp turned off if you turning on/off the lamp without unplugging it.
Diagram
The LED control device operating instructions
1. LED control device operating voltage: 100V-240V~
2. The LED control device can not be used to exceed a voltage of 240V voltage for a
long time.
3. The LED control device may not work properly when the voltage less than 100V.
4. The plug of the LED control device should be firmly plugged into the outlet.
Functions and features
• Touch switch, three adjustable color temperatures and brightness with stepless dimming and three light settings.
• Adopting high-brightness LED lamp beads, illuminating with bright and soft light after special optical processing.
• High luminous intensity, the distance between the lampshade and the desk surface is 40cm and within the vertical illumination up to
800lx.
• Unique appearance design, creative, and convenient to use.
• High luminous efficiency.
Package contents
• One LED table lamp
• One table lamp instruction manual
• One LED control device
Important notes
• Do not shake the lampshade and the elbow pipe, and adjust the lamp gently.
• The light source of this lamp is not replaceable. Once the light source needs to be replaced, the whole lamp shall be replaced.
• Do not look the light source directly from a distance less than 0.5m for a long time.
Attention
• This table lamp is Class II luminaire, and it can only be used with the equipped LED control device. The lamp can only be used with DC9V
power supply. Please make sure the voltage used matches that of the lamp.
• Do not modify the product without permission, otherwise it might be damaged.
LED eye protection table lamp manual
Thank you for buying AIGOSTAR table lamp. Please read this manual carefully before operating your product.
EN
Do not disassemble the
product and repair it by
yourself.
Do not wipe the surface of the lamp
with acid or alkaline detergent.
Do not touch the lamp with
wet hands or a wet cloth.
8W
10*8W
Product specifications
Input voltage
100-240V- 50/60HZ
Output voltage
DC 9V
Output current
2A
LED control device parameter
Switch button
Color temperature
adjustment key
Brightness
adjustment key
1. 2.
3. 4.
Model
B10311ZIK/B10311ZIL
B10311ZIM/B10311ZIN
Working voltage
DC 9V
Max power
8W
Luminaire class
Class Ⅱ
LED color temperature
Can be adjusted
Table lamp parameter
To Next Page
Loading...