Step 1: Install/Remove the battery.
Step 2: Installation/Disassembly of Nozzles.
(After receiving the product, please charge the battery pack
first. The red light is the charging state, and the green light
is the full state. Charging time is about 6-7 hours. please do
not overcharge)
(1) Install the battery. As shown in the picture, snap the battery
onto the body.
(2) Remove the battery. Press the blue button to push out the
battery.
(1) Attach nozzles directly to the pressure washer without using
extension pole and rotate it firmly.
Email：cs@aihandstore.com 04
Packing List
Email：cs@aihandstore.com 05
Installation
Foam Cannon
Battery
High/Low
Pressure
Spray Nozzle
0.9FT Short Hose
6-in-1Nozzle
Water Filter
16.5FT Hose
Extension Pole
Storage Bag
Charger
Pressure Washer
1
2
4
5
876
11109
3
To Next Page