Need help?Do you have a question about the Aike AK2006H and is the answer not in the manual?
Step-by-step guide on how to use the hand dryer, including inserting and removing hands.
Explanation of the self-check indicator for malfunctions and error reporting.
Details on the power indicator, lamp status, and cover state when the unit is active.
Covers prohibited uses, risks for children, and warnings against wet environments or unit exposure to water.
Emphasizes proper power supply, dedicated sockets, grounding, and professional installation to prevent shocks and fires.
Instructions for cutting power during maintenance and guidelines for recycling waste electrical products.
This document describes the AIKE Jet Hand Dryer, model AK2006H, a high-speed, automatic hand dryer designed for hygienic and efficient hand drying.
The AK2006H is a jet hand dryer that operates without physical contact, ensuring a hygienic drying process. It utilizes high-speed airflow to dry hands quickly, reducing electricity costs compared to traditional methods. The dryer is equipped with an anti-damage timer that automatically stops the unit after 25 seconds of continuous operation, preventing overheating and allowing users to re-insert their hands to continue drying if needed.
The device features an intelligent heat system that adjusts the air temperature based on the room's ambient temperature. When the room temperature is above 25°C, it blows normal temperature air (700W) for a cooling effect. When the room temperature drops below 25°C, it switches to warm air (1850W) for comfortable drying. Users can also choose to turn off the intelligent heat system for continuous normal temperature air (700W) or, by removing the temperature sensor as explained in the instructions, force the unit to always blow warm air (1850W).
The design incorporates human engineering principles, with a 15° angle for ease of use. It includes a separate air supply for hygienic operation and a drain tank to collect water, preventing drips onto the unit or floor.
Electrical:
Dimensions:
Weight:
Activation:
Mounting:
The unit is certified with UL, CE, CB, RoHS, FC, and GS marks, indicating compliance with various safety and environmental standards.
To use the AK2006H, users simply stretch out both hands and insert them fully into the hand drying area. The unit automatically starts running. To effectively dry hands, users should pull their hands out slowly, allowing the air to blow off the water, and then pull them out completely. The self-check indicator on the right side of the unit will light up or flash if a malfunction or error occurs. In such cases, the power switch should be turned off, and after approximately 40 seconds when all indicators are off, the power switch can be turned back on. If the indicator persists, the unit should be disconnected from the socket, and the dealer contacted.
The unit features a power switch, a heating switch (for intelligent heat system control), and a speed switch. It also has a drying time and fault display, a power indicator, and a self-check indicator. A lamp illuminates the hand drying area.
The AK2006H is designed with maintenance in mind. It includes a drain tank and an air filter, both of which must be installed and regularly maintained. Power must be cut off during maintenance to prevent electric shock. If the machine malfunctions or shows abnormal conditions, power should be cut off, the leakage circuit breaker closed, and the supplier contacted for inspection and repair.
Safety Warnings:
Environmental Protection:
To Next Page
General