13
Composition & Maintenance
2.3 Maintenance
2.3.1 Routine Maintenance
In order to ensure the good working condition of the equipment, please fol-
low the recommendations below for routine maintenance.
[ 1 ] Cleaning the outer surface
When necessary
[ 2 ] Use special tools to clean the lens
When polluted or periodically
[ 3 ] Clean the Sky Port connector
When the equipment is connected to the plane abnormally
[ 4 ] Stored in a protective box
Long-term use
[ 5 ] Calibration
Device prompt or regular
2.3.2 Optical Lens Maintenance
To clean the optical lens, first use the air blow in the maintenance tool (do not
use the mouth to blow) to clean the surface dust, and then wipe it with a soft
cloth cleaning cloth; if the pollution is serious, you can wipe it with an optical
wipe first, then wipe it. Wipe the mirror cloth, but do not leave water stains.
Do not wipe hard when there is dust on the lens to avoid scratching the lens
or damaging the optical lens.
To Next Page
Loading...