Need help?Do you have a question about the AILF U10 and is the answer not in the manual?
General| Type | PIR Motion Sensor |
|---|---|
| Power Source | Battery |
| Detection Angle | 110° |
| Operating Temperature | -10°C to 50°C |
| Humidity | ≤95% RH |
| Installation Height | 2.2 meters |
Essential safety precautions and warnings for operating the device, including laser hazards and proper connection procedures.
Overview of the UAV Based Laser Methane Leakage Detector (U10) and its primary function in methane gas detection.
Explains the scientific basis of methane detection using laser absorption spectroscopy and Lambert's law.
Defines and illustrates the concept of unit concentration (ppm.m) used for measuring methane gas.
Lists the technical specifications and operational parameters of the U10 detector.
Details the physical components and parts of the UAV-based methane leakage detector.
Instructions for checking equipment integrity and proper storage conditions before operation.
Guidelines for routine maintenance and optical lens cleaning to ensure optimal equipment performance.
Steps for installing and connecting the U10 detector to the UAV for operation.
Legal disclaimers regarding third-party software and hardware compatibility.
Overview of the user interface elements and their functions during inspection operations.
Details the concentration display, settings, and parameters within the device's operational interface.
Configuration options for the device, including alarm limits and other operational parameters.
Information on system messages, error classes, and status prompts for the device.
Explanation of the function buttons used for common inspection tasks and navigation.
Procedures for logging in, starting, and ending inspections, including alarm and attention point management.
Features for managing, editing, and displaying inspection points like start, end, and alarm points.
Options for setting up and executing autonomous flight paths for inspections, including waypoint and block scan modes.
Customization options for alarm areas, time intervals, distance intervals, and alarm types.
Configuration settings related to the device's serial number, version, and calibration.
Details on system messages and event logs during operation.
Management and editing of inspection routes and the generation of patrol reports.
Process for generating inspection reports from recorded data, requiring internet connectivity.
How to view, output, and manage generated inspection reports.
Options for printing or emailing inspection reports.
Functionality for downloading and managing offline maps for use during inspections.
Lists and explains common error codes, their meanings, and recommended troubleshooting steps.
To Next Page