21
Operation
3.4 Start
3.4.1 Login
Enter the inspector‘s name in the User Name box and click the “Login”.
3.4.2 Start / End Inspection
After ensuring that the app is properly connected to the device, click the “Start
Patrol” to start the inspection. The system automatically adds a start iden-
tifier to the current location.
Click the “End Patrol” to end the inspection. The system automatically
adds the end marker.
You must click the “Start Patrol” to record the path and perform a con-
centration overrun alarm.
3.4.3 Alarm and attention
During the inspection, when an alarm event occurs, the system automatically
adds an alarm flag and records the maximum value of the alarm.
If you encounter other hidden dangers, or manually determine the events to
be recorded, you can click the "Add Focus" , the application will add the
attention mark in the current geographic location.
3.4.4 System Configuration
Click the "System Configuration" to open the settings menu, including
software settings, system messages, inspection routes, inspection reports,
offline maps, and software information.（PART 4）
CAUTION
To Next Page
Loading...