Need help?Do you have a question about the Aim-TTI TG315 and is the answer not in the manual?
Details frequency range, vernier accuracy, and display capabilities.
Specifies distortion, linearity, rise/fall times, and DC offset for waveforms.
Main output impedance, amplitude, attenuator, and DC offset settings.
Details accuracy for internal frequency and amplitude measurements.
Specifies range, sensitivity, time, and accuracy for external measurement.
Procedure for changing the mains operating voltage.
Correct fuse types and ratings for voltage settings.
Connection details for a three-core mains lead.
How to set frequency using range buttons and vernier.
Details frequency range, vernier accuracy, and display capabilities.
Specifies distortion, linearity, rise/fall times, and DC offset for waveforms.
Main output impedance, amplitude, attenuator, and DC offset settings.
Details accuracy for internal frequency and amplitude measurements.
Specifies range, sensitivity, time, and accuracy for external measurement.
Procedure for changing the mains operating voltage.
Correct fuse types and ratings for voltage settings.
Connection details for a three-core mains lead.
How to set frequency using range buttons and vernier.
General| Output Power | 15W |
|---|---|
| Display | LCD |
| Waveform Types | Sine, Square, Triangle |
| Modulation Types | AM, FM |
| Interface | USB, RS232 |
| Dimensions | 250mm x 106mm x 300mm |
To Next Page
