Remove the rubber cap.
Use a 5mm hex wrench to loosen the bolt and discard the plastic
protective cover.
A
Note
The following steps are only a general guide to help assemble an electric bicycle,
not a complete or comprehensive manual for all aspects of assembly, maintenance,
and repair. Consult a certified, replaceable bicycle repairman to help assemble,
repair, and maintain the electric bicycle.
Assembly Instructions
Open the Bicycle Packaging.
Find someone who can safely lift heavy objects to help open the bicycle
box, remove the Big Sur from the box, carefully remove the packing
materials that protect the frame and parts, and take out the small box
embedded in the packing foam. These are the charger and accessories.
Recycle packing materials as much as possible, especially cardboard and
foam.
Step One
Remove All Packaging Foam and Zip Ties (Be careful if using scissors).
Step Two
Step Three
16
To Next Page
Loading...