Carefully install the front wheel
between the forks.
C
Use a 15mm open-end wrench to tighten the wheel axle bolt to the
recommended torque value of 25-30Nm.
D
A front wheel or handlebar stem that is not
properly secured can lead to loss of control,
serious injury, or death. Check that the front
wheel and handlebar stem are correctly secured
to the bicycle during assembly and before each
ride. Note: Do not touch the braking apparatus,
especially when the wheel and bicycle are in
motion, as this can lead to serious injury. The
absence of oil can cause squeaking and reduce
braking performance.
Lower the bike stand.
Step Five
WARNING
18
To Next Page
Loading...