Need help?Do you have a question about the AIMS Power LiFePO4 and is the answer not in the manual?
Highlights high charge cycles, 10-year lifespan, high amp capacity, and stable voltage output.
Covers Bluetooth monitoring, wide temperature range, low maintenance, and lightweight design.
Details protection against short circuits, physical damage, thermal exposure, and over/under-charging.
Explains the Battery Management System's role in circuit protection and preventing hazards.
General warnings on connections, metal objects, puncture, water, other batteries, and operational safety.
Advisories regarding heat exposure, direct sunlight, and storage in hot vehicles.
Prohibits battery modification and outlines actions for abnormal conditions or damage.
Provides guidance on recommended series and parallel wiring configurations based on voltage.
Emphasizes using compatible chargers, secure connections, and following instructions.
Covers regular inspection, terminal cleaning, temperature, disposal, storage SOC, and charge/discharge protocols.
Details on preventing polarity reversal, voltage matching, cable quality, and terminal preparation.
Recommendations for installation environment, orientation, terminal torque, fusing, and lugs.
Compares LiFePO4 battery performance and features against GEL, AGM, and Lead acid types.
Details nominal voltage, capacity, cycle life, charge method, temperature ranges, and current ratings.
Covers physical attributes like dimensions, weight, group size, and BMS operation parameters.
Specifies the limited warranty period for the LiFePO4 batteries.
Provides specifications for the 32700 cell including capacity, voltage, charge/discharge limits, and dimensions.
Details how usable battery capacity varies with changes in operating temperature.
Illustrates the DC wiring diagram for a 12V battery bank setup.
Depicts the DC wiring diagram for a 24V battery bank setup.
Shows the DC wiring diagram for a 48V battery bank setup.
Lists the various battery parameters viewable through the mobile application.
Guides on app download, Bluetooth pairing, battery selection, and connection procedures.
Describes the display of real-time current, voltage, and the State of Charge (SOC) gauge.
Explains how the battery state and number of charge cycles are presented on the screen.
Shows current temperature, Remaining Capacity (RMC), Design Capacity (DCAP), and Full Charge Capacity (FCC).
Details Average Time to Empty (ATTE), Average Time to Full (ATTF), serial number, and manufacture date.
Outlines the 10-year limited warranty and conditions that may void it.
Provides information on the return process for defective products and contact details.
Highlights high charge cycles, 10-year lifespan, high amp capacity, and stable voltage output.
Covers Bluetooth monitoring, wide temperature range, low maintenance, and lightweight design.
Details protection against short circuits, physical damage, thermal exposure, and over/under-charging.
Explains the Battery Management System's role in circuit protection and preventing hazards.
General warnings on connections, metal objects, puncture, water, other batteries, and operational safety.
Advisories regarding heat exposure, direct sunlight, and storage in hot vehicles.
Prohibits battery modification and outlines actions for abnormal conditions or damage.
Provides guidance on recommended series and parallel wiring configurations based on voltage.
Emphasizes using compatible chargers, secure connections, and following instructions.
Covers regular inspection, terminal cleaning, temperature, disposal, storage SOC, and charge/discharge protocols.
Details on preventing polarity reversal, voltage matching, cable quality, and terminal preparation.
Recommendations for installation environment, orientation, terminal torque, fusing, and lugs.
Compares LiFePO4 battery performance and features against GEL, AGM, and Lead acid types.
Details nominal voltage, capacity, cycle life, charge method, temperature ranges, and current ratings.
Covers physical attributes like dimensions, weight, group size, and BMS operation parameters.
Specifies the limited warranty period for the LiFePO4 batteries.
Provides specifications for the 32700 cell including capacity, voltage, charge/discharge limits, and dimensions.
Details how usable battery capacity varies with changes in operating temperature.
Illustrates the DC wiring diagram for a 12V battery bank setup.
Depicts the DC wiring diagram for a 24V battery bank setup.
Shows the DC wiring diagram for a 48V battery bank setup.
Lists the various battery parameters viewable through the mobile application.
Guides on app download, Bluetooth pairing, battery selection, and connection procedures.
Describes the display of real-time current, voltage, and the State of Charge (SOC) gauge.
Explains how the battery state and number of charge cycles are presented on the screen.
Shows current temperature, Remaining Capacity (RMC), Design Capacity (DCAP), and Full Charge Capacity (FCC).
Details Average Time to Empty (ATTE), Average Time to Full (ATTF), serial number, and manufacture date.
Outlines the 10-year limited warranty and conditions that may void it.
Provides information on the return process for defective products and contact details.
General| Brand | AIMS Power |
|---|---|
| Model | LiFePO4 |
| Category | Battery Pack |
| Language | English |
To Next Page