Set Clock Mode
O-01= xx Hr
Set Clock Mode
O-02= HH:MM:SS
Set Date
O-03= MM/DD/YY
Setup Done
DFLT RCLL SAVE
Turn ON PV Input
Breaker Now
DATA
ENTER
ESC
RESET
DATA
ENTER
ESC
RESET
DATA
ENTER
ESC
RESET
DATA
ENTER
ESC
RESET
ESC
RESET
Use
or
key to change
the setting
values
▲
▼
SAVE: If SAVE is selected by pressing
key, the controller will save the entered
settings and operate with them
RCLL (RECALL): Pressing
key will return to the last setting prior to entering
setup.
DFLT (DEFAULT): If DFLT is selected by pressing
key, the controller will revert
to and operate at default settings based on the original voltage,
battery type and capacity entered in the initialization process.
To Next Page
