What to do if AINSWORTH Touch terminals show a Coin in Yo-Yo event?
If your AINSWORTH Touch terminal displays a 'Coin in Yo-Yo' event, it could be due to a faulty coin validator solenoid. Try resetting the fault using the 'Reset' key. You can also try inserting a coin into the coin validator. If the issue persists, consider replacing the coin validator with a new one.
Why AINSWORTH Touch terminals does not operate?
If your AINSWORTH Touch terminal is not operating, check the following: * Ensure the mains power lead is properly plugged in and turned on. * Verify the power switch on the note stacker is turned on. * Inspect the fuses on the power supply for any blown fuses. * If none of the above resolve the issue, the power supply may be faulty.
Why AINSWORTH Touch terminals does not accept bank notes?
If your AINSWORTH Touch terminal isn't accepting bank notes, it could be due to contaminated or damaged note validator optical sensors, or a faulty note validator unit.
Why AINSWORTH Touch terminals hopper overfilling?
If the hopper is overfilling in your AINSWORTH Touch terminal, it may be due to the hopper probe being shorted to ground.
Why AINSWORTH Touch terminals button lamps not illuminating?
If the button lamps on your AINSWORTH Touch terminal are not illuminating, it could be due to a blown button lamp (for single lights), a disconnected connector on the button, an improper connection to the Backplane Board (for all lights), or open-circuited wiring.
Describes the terminal's external structure, locks, and main door.
Details the 22" LCD monitor, its access, and control panel functions.
Details the main door, including bill acceptor, speakers, and coin entry.
Describes the function of the button panel, door sensors, and audio output.
Identifies major internal parts like logic cage, power supply, and note validator.
Explains the function and parts of the note validator and stacker.
Describes the optional printer and provision for player tracking modules.
Details the logic cage, mainboard, and backplane board housing core electronics.
Explains power-up, play mode, and game theme display sequences.
Covers physical, electrical, environmental specs and compliance standards.
Outlines terminal dimensions, inspection, and secure mounting procedures.
Steps for NVRAM/E2PROM clearing and IP configuration for terminal startup.
Accessing maintenance modes via PIN for system tests and audits.
Procedures for testing printer, touchscreen, door switches, and SHA-1 verification.
Guidelines for cleaning exterior, monitor, and basic component upkeep.
Procedures for clearing note jams, cleaning validators, and error displays.
Steps for circuit breaker reset, power supply checks, and monitor adjustments.
Guides for replacing LCD monitor, speakers, subwoofer, and button panels.
Procedures for replacing logic cage, mainboard, and backplane board assemblies.
Lists common errors, causes, and solutions for terminal operation issues.
A detailed list of part numbers for replacement and service.
General| Brand | AINSWORTH |
|---|---|
| Model | A560 LOWBOY |
| Category | Touch terminals |
| Language | English |
To Next Page
