1
The JP-DVF-PR is a JP Series video door station with a built-in AC-PROX-1G proximity card reader. The station connects directly to a
JP-4MED master station using 2-conductor wire, and the card reader uses a standard Wiegand connection to connect to a compatible
access control system.
JP-DVF-PR
INSTALLATION GUIDE
1. Camera
2. Microphone
3. White LED for low light illumination
4. Speaker
5. Directory card
6. Call button
7. Card reader
• PTZ camera
• Stainless steel faceplate
• Built-in RFID card reader
Features
For ush mounting, recess the supplied back box into the wall,
then attach the mounting bracket using the four provided bracket
screws.
Back Box Dimensions: 10-1/2" H x 5-13/16" W x 2-5/16" D
JP-DVF-PR Dimensions: 11-11/16" H x 7" W x 2-1/16" D
For surface mounting, use the SBX-IDVFRA surface mount box.
This box can mount to a standard single-gang box or to any at
surface.
To insert the transparent nameplates, remove the vandal-
resistant front panel from the ush mount back box. Peel o the
protected seals from both sides of the plate. Write in the desired
text, being sure to leave 1" of white space on the right side.
Insert the nameplate into the opening.
Installation
Package Contents
JP-DVF-PR
Door Station
Security Driver
Transparent
nameplate (2)
Flush mount backbox
and tamper-resistant screws
1
2
5
4
3
7
6
JP-DVF-PR Names and Functions
To Next Page
Need help?
General
