Aiphone TD Series - Precautions on Installation and Wiring; Cautionary Notes; Wiring Information; Terminal Block Layout

PRECAUTIONS ON INSTALLATION & WIRING
/N CAUTION
* Do not connect any terminal on any unit to AC power lines.
* Unplug all power supplies while making wiring connections on any audio and video equipment.
* DE-UR is an adaptor for indoor installation only. Follow precautions as stated in the Manuals packed with
TD-H and MY-CU monitor.
* Locate DE-UR unit(s) closely to power supply PS-12A (PS-12C) of TD-H or TD-Z system, so as to be fed DC12V
from it.
* Wiring to EL-9S door release must run in a separate jacketed cable and apart from intercom wiring.
E Before installing DE-UR, the contents of this Manual must be thoroughly read and understood.
$ WIRING
E Terminal block layout
+°@ +, — 12V DC power
os 15.2 Door station connection
2]
1“ C: Selective communication from TD-H/TD-Z masters
c°]
D D Call-in tone to TD-H masters (or TD-Z)
EL, EL: Dry closure contact for door release
E DE-UR & power supply location
It is suggested to mount a DE-UR unit(s) in a recessed area, together with power supply PS-12A (PS-12C) and
video adaptor, etc. Select a location that allows limited access only by qualified personnel, and is dust-free
environment possible.
Audio door station PanTilt video door station 2 PanTilt doors plus 1 camera
6 to MYH-CU
2to 4 to TD-H(TD-Z) 4to TD-H 5to TD-H
IF-DA
4
to
.
|
4 MY-CU _-{5 DE-UR__DE-UR PS-12A or
TT 7
PS-12Aor O1 fare Rear
PS-12A or PS-12C
PS-12C oan
: DE-UR PS-18Dor = 282 x9
DE-UR PS-18C to PanTilt
fo door or
2 to camera
2to EL-9S,
EL-9S, AC trans. 2ea.x 3
AC trans. AC AC to EL-9S,
AC AC trans. AC AC