Need help?Do you have a question about the Air cat 6700-5-336 and is the answer not in the manual?
General| Air Inlet | 1/4" NPT |
|---|---|
| Power Source | Pneumatic |
| Manufacturer | AirCat |
| Fastener Type | Nails |
| Magazine Capacity | 100 |
Read and understand safety instructions before installing, operating, repairing, or maintaining the power tool.
Wear impact-resistant eye protection due to high-velocity projectiles from workpiece, accessories, or tool failure.
Keep neckwear, hair, and gloves away from the tool and accessories to prevent entanglement.
Handle tool correctly with a balanced position and secure footing; keep hands away from moving parts.
Maintain comfortable posture, secure footing, and report symptoms of discomfort or pain.
Only use accessory sizes and types recommended by the power tool manufacturer.
Be aware of slippery surfaces, trip hazards, hidden utilities, and avoid use in potentially explosive atmospheres.
Control dust and fumes at the point of emission to prevent health risks like cancer or respiratory diseases.
Use hearing protection to prevent permanent hearing loss and other problems from high noise levels.
Operate tool with a light grip and balanced posture to minimize vibration exposure and potential injury.
Never direct pressurized air at yourself or others; use whip check safety cables for hose connections.
Always wear eye protection, safety gloves, and safety aprons when operating a sander or polisher.
Disconnect air supply before adjustments and only use accessories with a rated speed matching or exceeding the tool.
Do not modify the sander or polisher for use with grinding wheels, cut-off wheels, or wire brushes.
Only personnel trained in correct methods should change pads, sanding discs, belts, or bonnets.
Details on model number, pad size, orbit, pad type, speed, weight, dimensions, noise, vibration, and air consumption.
Operate at 90 PSI; higher pressure reduces life. Use 3/8" I.D. hoses and 1/4" NPT inlet for optimal performance.
Detailed list of parts with reference numbers, part numbers, descriptions, and quantities for the sander.
Address loss of power or erratic action by checking air supply, cleaning strainer, and flushing the tool.
Use an in-line filter-regulator-lubricator with high-grade turbine oil for sustained operation and tool life.
Two-year warranty on defects, excluding accessories, wear, abuse, or unauthorized repairs.
Return tool freight prepaid to an authorized service center with proof of purchase and defect description.
To Next Page
