This document is the user manual for the AIR CHOICE 2-in-1 Tower Fan, model BLF-YH05. It provides comprehensive information on the product's features, installation, operation, maintenance, and safety precautions.
Function Description
The AIR CHOICE 2-in-1 Tower Fan is an electric fan designed to provide cooling. It features a 2-in-1 design, combining a tower fan with additional functionality, although the specific "2-in-1" aspect is not explicitly detailed beyond its tower fan form factor. The fan is manufactured using advanced fan production technology, emphasizing a beautiful modeling, convenient use, high blast capacity, low electricity consumption, low noise, long service life, and safety and reliability. It is designed to offer a cool summer experience.
Important Technical Specifications
- Model: BLF-YH05
- Rated Voltage: AC120V
- Rated Frequency: 60Hz
- Rated Power: 50W
- Control Type: Electronic
The fan's internal circuit diagram illustrates its components, including a synchronous motor, thermal fuse, capacitor, and a circuit board with multiple connections.
Usage Features
The tower fan is equipped with a control panel and a remote control for convenient operation.
Control Panel Features:
- Power Switch: Activates the fan, starting it at a medium gear and low wind speed. The power and wind speed buttons illuminate upon activation.
- Speed Control: Allows selection between low, medium, and high wind speeds.
- Swing Function: Initiates automatic left or right oscillation, with the corresponding button lighting up.
- Wind Modes: Offers a choice of natural wind, normal wind, and sleep wind modes.
- Timer Function: A 7.5-hour timer that can be increased by 0.5-hour increments with each press.
- Blanking Function: The indicator lights automatically turn off after three minutes of inactivity while the fan continues to operate.
Remote Control Features:
- Range: The remote control operates within 5 meters of the receiver. Its effective range may be reduced if not aimed directly at the receiver or if there are barriers.
- Receiver Location: The receiver is located on the product panel.
- Interference: High-frequency machines in the room may reduce the remote control's sensitivity due to electromagnetic interference.
- Handling: Users are advised to keep the remote control properly and avoid impacts or falls.
Installation:
- Unpacking: Open the box, place the product on a flat surface, and verify all parts against the packing list.
- Base Assembly (if applicable): Thread the power line into the chassis, nut, and main engine. Screw the nut clockwise into place. Organize the power line within the chassis trunking. (Note: Chassis installation is not required for model BLF-YH05).
- Main Engine Installation: Align the six snap joints on the machine body of the air outlet with the six snap joint holes on the main engine. Push the air outlet towards the panel until it aligns, completing the main engine installation.
Safety Precautions:
- Always turn off and unplug the fan before cleaning or when not in use.
- Remove the plug by grasping it, not by pulling the cord.
- Never plug in or unplug the fan with wet hands.
- Avoid placing the fan in water or other liquids to prevent electrical hazards.
- Store the fan in a dry and cool place.
- Do not leave the fan unattended when plugged in.
- Use the fan only for its intended purpose as described in the manual.
- Do not operate the appliance if the cord or plug is damaged, if it malfunctions, or if it has been dropped or damaged. Follow warranty instructions for such cases.
- Place the fan on a flat, level surface to prevent overturning.
- Avoid touching operating parts.
- Never drop or insert objects into any openings or into the area protected by guards.
- Do not block or cover the airflow.
- Do not operate the fan without the guard.
- Do not place the appliance on or near hot gas flames, electric elements, or heated ovens.
- Close supervision is necessary when operating near children. This appliance is not a toy and should be operated by an adult. Children should be supervised to ensure they do not play with the tower fan.
- This appliance is not intended for use by individuals with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a responsible person.
- Do not let the power cord hang over the edge of a table or bench top or touch hot surfaces.
- WARNING: Do not use this fan with any solid-state speed control device to reduce the risk of fire or electric shock.
Troubleshooting:
- Fan not starting: Check power connection and ensure the gear switch is turned on.
- Fan shaking: Verify stable placement and check for any foreign objects nearby.
Maintenance Features
- Cleaning: Before cleaning, turn off and unplug the fan.
- Surface Cleaning: Wipe the machine surface with a wet soft cloth. Avoid using chemicals like benzene, alcohol, or gasoline, as these can damage the fan's surface or the entire unit.
- Product Storage: Clean the product, place it back in its carton, and store it in a dry and cool place.
Warranty:
AIR CHOICE provides a ONE (1) YEAR warranty against defects in materials and/or workmanship under normal use from the date of purchase. During the Warranty Period, AIR CHOICE will, at its option, repair the defect, replace the product with a functionally equivalent new product, or provide a store credit. The warranty does not cover damage from improper use, accidents, abuse, unauthorized service, use with non-covered accessories, modifications, periodically replaced items (like batteries or light bulbs), "as is" products (e.g., floor models, refurbished items), or commercial use. For warranty service, contact Support@airchoiceproducts.com.
For any questions, help, or warranty claims, contact Support@airchoiceproducts.com. The usual response time is within 12 hours.
To Next Page
Need help?
General
