EasyManua.ls Logo

Air King 9212 - User Manual

Air King 9212
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Rev. B 11/05 1 5084022
OPERATION
Plug in cord and select desired operating speed with knob on back
of fan.
MAINTENANCE
WARNING: ALWAYS UNPLUG THE CORD BEFORE SERVICING.
CLEANING: Use a soft cloth and a mild soap solution such as liquid
dish washing detergent.
CAUTION: Do not use gasoline, benzine, thinner, harsh clean-
ers, etc. which will damage the fan.
Dry all parts with a soft cloth completely before reconnecting to
power supply.
STORAGE: When not in use, keep unit in a clean dry place.
MOTOR IS PERMANENTLY LUBRICATED.
SAVE THESE
INSTRUCTIONS
SPECIFICATIONS
Motor ................................. 120V, 60 Hz
Blade diameter.................. 12" (30.5 cm)
Speeds .............................. 3
Control .............................. Rotary Switch
Air flow distribution ........... 360°
Approvals .......................... UL Listed. Close mesh fan guard
meets OSHA requirements.
DESCRIPTION
The AirKing 12" (30.5 cm) floor/table fan features whisper-quiet
performance with a 3-paddle fan blade. The fan has a permanently
lubricated motor with a 9 ft (2.7 m) 18/3 cord set.
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precau-
tions should always be followed to reduce the
risk of fire, electric shock and injury to person,
including the following:
1. Read all instructions before using Fan.
2. Make certain that the power source conforms to the electrical
requirements of the Fan.
3. Use this Fan only as described in this manual. Any other use
not recommended by the manufacturer may cause fire, electrical
shock, or injury to persons.
5. Unplug power cord before installing, servicing, or moving the Fan.
WARNING: DO NOT DEPEND UPON THE ON-OFF
SWITCH AS THE SOLE MEANS OF DISCONNECTING
POWER WHEN INSTALLING OR SERVICING THE FAN.
ALWAYS UNPLUG THE POWER CORD.
6. This Fan must NOT be used in potentially dangerous
locations such as flammable, explosive, chemical-laden
or wet atmospheres.
7. The power cord is equipped with a three-prong grounded plug
that must be inserted into a matching receptacle. Under no
circumstances must the grounding prong be cut off the plug.
Where a two-prong wall receptacle is encountered, it must be
replaced with a properly grounded three-prong receptacle in-
stalled in accordance with the National Electrical Code (NEC)
and all applicable local codes and ordinances. This work must
be done only by a qualified electrician, using copper wire only.
WARNING: USE OF A THREE-PRONG TO TWO-PRONG
ADAPTER IS NOT RECOMMENDED. IMPROPER CON-
NECTION MAY CREATE THE RISK OF ELECTROCUTION.
USE OF SUCH ADAPTERS IS NOT PERMITTED IN CANADA.
8. Where possible, avoid the use of extension cords. If they must be
used, minimize the risk of overheating by ensuring that they are
UL listed. Never use a single extension cord to operate more
than one Fan.
9. Do not operate any Fan with a damaged cord or plug after the Fan
malfunctions, has been dropped or damaged in any manner.
Return Fan to authorized service facility for examination, electrical
or mechanical adjustment or repair.
10.Do not insert or allow fingers or foreign objects to enter any
ventilation or exhaust opening as it may cause an electric shock,
fire, or damage the Fan. Do not block or tamper with the Fan in
any manner while it is in operation.
11.Always place the Fan on a stable, flat, level surface when
operating, to avoid the chance of the Fan overturning. Locate the
Power Cord so the Fan or other objects are not resting on it. Do
not run Power Cord under carpeting. Do not cover Power Cord
with throw rugs, runners, or the like. Arrange Power Cord away
from room traffic and where it will not be tripped over.
12.This Fan is not intended for use in wet or damp locations.
Never locate a Fan where it may fall into a bathtub or other
water container.
13. Do not use Fan outdoors.
WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK – DO NOT USE THIS FAN WITH ANY SOLID STATE
SPEED CONTROL DEVICES.
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT
DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO
COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
OPERATING INSTRUCTIONS & PARTS MANUAL
FLOOR/TABLE FAN
12" (30.5 cm) MODEL 9212
Question and Answer IconNeed help?

Do you have a question about the Air King 9212 and is the answer not in the manual?

Summary

Operating Instructions and Safety

Product Description

Provides a brief overview of the AirKing 12-inch floor/table fan's features and motor.

Specifications

Details the fan's electrical, physical, and compliance specifications like motor, blade diameter, speeds, and approvals.

General Safety Information

Outlines essential precautions to reduce risks of fire, electric shock, and injury during use.

Operation

Instructions on how to plug in and select the desired operating speed for the fan.

Maintenance and Storage

Guidance on cleaning, care, and proper storage of the fan, including motor lubrication.

Limited Warranty and Disclaimer

Warranty Terms

Details the three-year limited warranty for the motor and one year for other parts against defects.

Limitation of Liability

Specifies AirKing's liability limits for consequential and incidental damages, not exceeding purchase price.

Warranty Disclaimer

Clarifies that no warranties beyond the stated limited warranty are expressed or implied by AirKing.

Product Suitability and Codes

Addresses compliance with local codes and suitability for intended product installation and use.

Prompt Disposition

Outlines the process for seeking prompt correction or adjustment for defective products under warranty.

Air King 9212 Specifications

General IconGeneral
BrandAir King
Model9212
Blade Size12 inches
Speed Settings3
Voltage120V
Mounting TypeWall Mount
ColorBlack
Size12 inches

Related product manuals