Air Lift 3H User Manual

Air Lift
Performance
3H Height
Upgrade Kit
27705
MN-947 • 011510 • ERN 7687
For maximum eectiveness and safety,
please read these instructions completely
before proceeding with installation.
Failure to read these instructions can result in
an incorrect installation.
INSTALLATION GUIDE
PATENTED
™

Air Lift 3H Specifications

General

Type	Air Suspension Management System
Height Sensors	Yes
Pressure Control	Yes
Manufacturer	Air Lift Performance
Model	3H
Pressure Sensor	Integrated
ECU	Included
Mobile App Compatibility	Yes
Compatibility	Universal
Pressure Range	0-200 PSI
Number of Channels	4
Power Supply	12V DC
Control Type	3H
Control Method	Digital
Height Sensor Compatibility	Yes
Display Type	LCD

Summary

Introduction and Safety Information

Notation Explanation and Safety Symbols

Harness Installation

Install Harness

Instructions for routing and connecting the wiring harness for height sensors.

Height Sensor Installation and Adjustment

Determining Height Sensor Mounting Point

Guidance on selecting optimal locations and orientations for height sensors.

Selecting Sensor Location

Steps to measure suspension travel and determine sensor mounting points.

Selecting Sensor Arm Hole

Modifying Linkage Angle

Linkage Assembly and Modification

Linkage Assembly and Modification Steps

System Configuration and Calibration

Display Settings Configuration

Verifying Suspension Range

Using tools to ensure sufficient suspension travel for accurate measurements.

Modifying Sensor Arm for Fit

System Calibration

Final calibration steps for height sensors after installation.

Height Sensor Install Tool

Using the Height Sensor Install Tool