Why does the Air Monitor VOLU-flo/OAM II flow reading seem inaccurate?
If the flow readings on your Air Monitor Transmitter seem inaccurate for the current conditions, ensure the transducer is appropriately sized for the duct's flow and that the correct span value is selected in the Transducer Configuration menu. If both are correct, calibrate the transducer and verify the air handler's operation.
What to do if the Air Monitor VOLU-flo/OAM II Transmitter's total flow exceeds the Design Flow Max setting?
If the total flow exceeds the Design Flow Max setting on your Air Monitor Transmitter, the flow setting may be too low for the actual duct flow. Try increasing the DFM setting. If this doesn't resolve the issue, the duct flow might be beyond the transducer's capacity, possibly requiring a new transducer.
How to troubleshoot 0 FPM reading on Air Monitor Transmitter?
If your Air Monitor Transmitter displays 0 FPM in Normal Mode, verify that the fan is operational and that the flow is above the lockdown value. Also, ensure that the autozero function is not active.
Why is the temperature reading on my Air Monitor VOLU-flo/OAM II Transmitter so low (-50° F)?
If your Air Monitor Transmitter shows a temperature of -50° F, the calibration might be incorrect, or the RTD may have a loose wire connection.
General| Brand | Air Monitor |
|---|---|
| Model | VOLU-flo/OAM II |
| Category | Transmitter |
| Language | English |
To Next Page
