To Next PageTo Next Page
Need help?Do you have a question about the Air Products RT-3000-P and is the answer not in the manual?
Factors for selecting the optimal duct smoke detector installation position.
Details on notched sampling tubes, their lengths, and duct width compatibility.
Explains the patented mechanism for installing/removing sampling and exhaust tubes.
Instructions for preparing the HVAC duct for detector mounting, including drilling holes.
Guidance on securely attaching the duct smoke detector unit to the HVAC duct sheet metal.
Procedure to verify correct air sampling using a differential pressure gauge.
Details on terminal blocks, wire prep, general wiring, and power connections.
Instructions on selecting and connecting the correct input power source.
Example wiring diagram for shutting down fan supply source during a fire alarm.
Wiring details for connecting remote annunciator accessories to the unit.
Wiring diagrams for connecting to Style 'D' / Class 'A' and Style 'B' / Class 'B' IDC.
Wiring instructions for MSR-50 and MSR-100 series remote accessories.
Wiring instructions for MS and SHP remote accessories.
Diagrams showing interconnection of RT-3000 with other Air Products duct detectors.
Wiring for common horn/strobe, shutdown, and test/reset functionalities.
Wiring for individual horn/strobe units that operate only on their own alarm.
Wiring for common horn/strobe units that activate on any single alarm.
Procedures for testing the ionization and photoelectric detector heads using magnet or smoke.
Procedure to test the trouble contacts by removing the detector head.
Guidelines for safely removing and replacing the unit's cover while maintaining seal.
General| Sensor Type | Photoelectric |
|---|---|
| Test Button | Yes |
| Type | Smoke Alarm |
| Alarm Sound | 85dB at 3m |
| Hush Feature | Yes |
| LED Indicator | Yes |
| Operating Humidity | 10% to 90% relative humidity (RH) |
