What to do if Air Weigh Accessories shows no communication with Truck ComLink?
If your Air Weigh Accessories system displays 'No communications with Truck ComLink', this message will appear until the ComLink is found. Verify that all connections are properly secured.
What to do if Air Weigh Accessories shows no communication with Trailer Scale?
If your Air Weigh Accessories system displays 'No communications with Trailer Scale', this message will appear until the trailer scale is found. Make sure the trailer scale is powered on.
What to do if I get an EEPROM error on my Air Weigh Accessories?
If you encounter an EEPROM error with your Air-Weigh Accessories, it indicates a memory failure. The unit needs to be sent to Air-Weigh for repair.
General| Brand | Air Weigh |
|---|---|
| Model | AW5800 |
| Category | Accessories |
| Language | English |
Details the process of routing air lines for scale installation.
Instructions for installing air pressure sensors into the suspension lines.
Step-by-step guide for manual calibration using empty and heavy weights.
Procedure for entering empty weight readings into the scale.
Procedure for entering heavy weight readings into the scale.
Method for calibrating using pre-known ratio and offset values.
Troubleshooting steps for inaccurate or unstable weight readings.
Addresses issues related to vehicle suspension affecting scale accuracy.
Common suspension factors impacting scale accuracy and repeatability.
To Next Page