Do you have a question about the Aircat 1000-TH and is the answer not in the manual?
Brand | Aircat |
---|---|
Model | 1000-TH |
Category | Impact Driver |
Language | English |
Read and understand safety instructions before operating or maintaining the power tool. Ensure only qualified operators use it.
Wear impact-resistant eye protection during operation to guard against high velocity projectiles from tool or workpiece failure.
Keep neckwear, hair, and gloves away from tool and accessories to prevent choking or lacerations.
Use caution for crushing, impact, cuts, abrasions, and heat. Maintain a balanced posture and secure footing.
Be aware of discomfort from repetitive motions. Report persistent symptoms to employer and seek medical advice.
Use only accessories and consumables recommended by the power tool manufacturer.
Be aware of slippery surfaces, trip hazards, and hidden utilities. Tool is not insulated from electric power.
Assess and control dust/fume hazards which can cause cancer or respiratory diseases. Use appropriate PPE.
Protect against high noise levels that can cause permanent hearing loss. Use hearing protection.
Be aware of vibration risks causing nerve/blood supply damage. Report symptoms and use proper grip and support.
Handle air pressure and connections with care. Never direct air at others. Check hoses and fittings.
Always wear eye and hearing protection. Use retaining rings for sockets. Use only impact-rated sockets.
Operate at 90 PSI. Higher pressure or unclean air shortens tool life. Drain air tank daily, clean filter weekly.
Use torque wrench to set torque. Set regulator to max for removing nuts, min-medium for installing. Do not overtighten.
Detailed breakdown of tool components with part numbers, descriptions, and quantities for maintenance and repair.
Address factors like reduced compressor output or air line restrictions. Clean tool with gum solvent if needed.
Ensure air line is shut off. Use in-line filter-regulator-lubricator. Lubricate tool inlet for storage.
Warranted against defects in material/workmanship for 2 years. Excludes accessories, wear, abuse, misuse, or unauthorized repairs.