Airco BN5018A User Manual

Model / Modèle / Modelo: BN5018A
2”/ 50 mm 18ga. Brad Nailer
Operator’s Manual (p.2)
Cloueuse pour clous de finition de 50 mm (2 po), calibre 18
Guide d’utilisation (p.8)
Clavadora por clavitos calibre 18 de 50 mm (2”)
Manual del operador (p.15)
SAVE THIS MANUAL
You will need this manual for safety instructions, operating procedures, and warranty.
Put it and the original sales invoice in a safe, dry place for future reference.
CONSERVEZ CE GUIDE
Vous aurez besoin de ce guide pour les instructions de sécurité, les procédures d’utilisation et la garantie.
Conservez-le dans un endroit sûr et sec pour référence future.
CONSERVAR ESTE MANUAL
Se va a necesitar este manual para instrucciones de seguridad, procedimientos de operación y para entender la
garantía. Colocarlo en un lugar seguro y seco para que sirva de referencia futura.

Airco BN5018A Specifications

General

Brand	Airco
Model	BN5018A
Category	Nail Gun
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

Personal Protective Equipment

Essential safety gear like safety glasses and ear protection to prevent injury.

Air Supply Requirements

Specifies correct air pressure, hose rating, and prohibited gas types for safe operation.

Tool Handling and Disconnection

Guidelines for safe disconnection, inspection, and fastener loading procedures.

Operational Safety & Ergonomics

Proper footing, balance, and tool grip to prevent accidents during operation.

Work Area and Fastener Safety

Precautions against fastener ricochet, workpiece splitting, and maintaining a clear work area.

Electrical Safety and Compliance

Guarding against electric shock and employer's role in enforcing safety.

BN5018A SPECIFICATIONS

OPERATING PROCEDURES

UNPACKING THE TOOL

Instructions to check all included components after unboxing the tool.

SETUP: AIR SOURCE

Guidance on connecting a clean, dry, regulated compressed air source to the tool.

SETUP: CONNECTING THE TOOL

Steps for connecting the tool to the air supply after setting compressor pressure.

SETUP: LOADING THE FASTENERS

Procedure for loading brad nails into the tool's magazine.

OPERATING THE TOOL

Instructions on how to adjust depth and drive fasteners into the workpiece.

MAINTENANCE

CLEAN AND INSPECT DAILY

Daily cleaning and inspection routines for tool functionality and safety.

SERVICE AND REPAIRS

Information on servicing and obtaining repairs from authorized centers.

TROUBLESHOOTING

PARTS LIST

WARRANTY