AirCycler® g1 Installation Testing Guide
®
Testing the AirCycler® g1 completed installation is a
simple process that includes testing the controller’s
connection to the thermostat, fresh air damper and
furnace.
LCD DISPLAY
OA - FRESH AIR DAMPER
IS OPEN
PERCENTAGE OF VENTILATION
COMPLETE
FAN ON FROM
THERMOSTAT
See reverse for troubleshooting tips and frequently asked questions
PLEASE FOLLOW THE STEPS BELOW
1. Turn thermostat FAN setting to ON.
2. Conrm AirCycler® g1 display shows FAN and OA (damper open).
3. Conrm furnace fan is running.
4. Remove AirCycler® g1 from its base. Conrm furnace fan has shut o.
5. Place the AirCycler® g1 back on the base.
6. Turn thermostat FAN setting back to AUTO to return to normal operation.
7. Conrm that AirCycler® g1 display shows number/percentage complete.
Testing is complete
To Next Page
Need help?
General
