Need help?Do you have a question about the AirCycler g1 and is the answer not in the manual?
Details the real-time battery backup clock for Operation Hours setting.
Defines wiring terminal labels (R, C, W, Gt, Gf, V, Vnc) and wire colors.
Specifies requirements for the central blower motor used with the AirCycler® g1.
Discusses preferred placement for the AirCycler® g1 controller unit.
Explains the two setup methods: Calculated Flow and Calculated Time.
Details setting the measured air flow for heat, cool, and fan calls.
Explains setting continuous air flow based on codes like ASHRAE 62.2.
Describes configuring additional fan time for whole-house mixing.
Covers setting specific ON and OFF times for ventilation operation.
Explains how to set the current time for the device.
Details setting the required minutes of fresh air per hour.
Describes configuring additional fan time for whole-house mixing.
Covers setting specific ON and OFF times for ventilation operation.
Explains how to set the current time for the device.
Explains how to view operational status like minutes left and time elapsed.
Shows remaining minutes in the current ventilation period.
Displays minutes the outdoor air damper has been open.
Describes how to scroll through and view current configuration settings.
Provides CFM requirements based on bedrooms and square footage.
Addresses common issues like no power, constant fan, or damper problems.
General| Brand | AirCycler |
|---|---|
| Model | g1 |
| Category | Controller |
| Language | English |
To Next Page
