Airflow Systems V410 User Manual (English)

To Next Page

OWNERS MANUAL

MODEL V410

(INCLUDES VIBRAPULSE



CLEANING SYSTEM*)

• INTRODUCTION

• SPECIFICATIONS

• UNPACKING

• INSTALLATION

• MOUNTING

• ELECTRICAL

• OPERATION

• MAINTENANCE

• TROUBLESHOOTING

• REPLACEMENT PARTS

• MOTOR TROUBLE GUIDE

***IMPORTANT***

THIS MANUAL CONTAINS PRECAUTIONARY STATEMENTS RELATING TO WORKER SAFETY. READ AND

SAVE THIS MANUAL COMPLETELY AND COMPLY AS DIRECTED. ALL THE POTENTIAL HAZARDS OF DUST

AND MIST CONTROL SYSTEMS AND EQUIPMENT ARE IMPOSSIBLE TO LIST; THEREFORE, OBTAIN THE

SERVICES OF A PROFESSIONAL INSTALLER. A FIRE PROTECTION EXPERT SHOULD BE OBTAINED IN THE

EVENT THE PRODUCT IS INTENDED FOR USES WHICH PRESENT A POTENTIAL RISK OF FIRE OR FIRE

PROPAGATION. REFER TO APPROPRIATE AUTHORITIES, AND DISCUSS YOUR INTENDED USE WITH YOUR

LOCAL DISTRIBUTOR OR AIRFLOW SYSTEMS, INC. WORKERS HANDLING EQUIPMENT OR SYSTEMS

SHOULD BE INSTRUCTED TO CONDUCT THEMSELVES IN A SAFE MANNER.

PART # 4KT11067 (REV 4/99/-/#32-2142)

*PATENT APPLIED FOR

The Local Exhaust & Ventilation Company Inc.

22-1050 Brock Rd, Pickering, Ontario L1W 3X4

Tel: 905.831.7001 Fax: 905.831-7443

Toll Free: 1.888.862.5356

E-mail: sales@lev-co.com Web Site: www.lev-co.com

Need help?

Do you have a question about the Airflow Systems V410 and is the answer not in the manual?

Airflow Systems V410 Specifications

General

Brand	Airflow Systems
Model	V410
Category	Dust Collector
Language	English

Summary

General Safety Rules

Airflow Systems Standard Overview

Model V410 Specifications

Unit Inspection and Unpacking

Unit Preparation and Installation

Compressed Air Supply

Guidelines for connecting and maintaining optimal pressure for the compressed air supply.

Vibra Pulse® Filter Cleaning System

Instructions for setting up and connecting the Vibra Pulse system for filter cleaning.

Unit Electrical

Three Phase Motors

Details on connecting and operating three-phase motors for the unit.

Unit Operation

Unit Maintenance

Vibra Pulse® System - Hose Replacement

Procedure for replacing the Vibra Pulse hose, including necessary steps and precautions.

Filter Service

Filter Replacement/Removal for Cleaning

Step-by-step guide for removing and replacing filters for cleaning or service.

Filter Cleaning - Vibra Pulse System

Instructions on how to use the Vibra Pulse system to clean the unit's filters.

HEPA Filters

Information regarding the use and servicing of optional HEPA filters.

AD Module

Details on the optional Adsorption Module (AD) for enhanced filtration.

Other Service

Replacement Parts

Troubleshooting

Notes

Appendix

Autoclean Safety Rules

Autoclean System Overview

Autoclean Specifications

Autoclean Electrical Requirements

Details on the electrical requirements for the Autoclean system.

Autoclean Unit Inspection and Unpacking

Autoclean Preparation and Installation

Autoclean Electrical Setup

Autoclean Control Wiring

Information on powering and connecting the Autoclean control system.

Airflow Systems V410 User Manual

Table of Contents