Airigami PAPIER AVION 9GBOE20A01

To Next Page

Parts included in this package:

FU Fuselage Page 2

WB Wing Box Page 2

TV Vertical Stabilizer Page 2

NG Nose Landing Gear Page 3

WG2 Wing, Underside, Port Page 3

WG3 Wing, Underside, Starboard Page 3

WG1 Wing, Upper Page 3

WF Wing Fairings Page 3

EI Engine Interiors Page 3

EC Engine Cowlings Page 3

MG Main Landing Gear Page 3

For best results, we recommend that this package be printed on the

following paper stocks:

Pages 2-3 Model Glossy 80lbs

This is a genuine, official Airigami design. This design is provided free-of-

charge - you should never, ever pay for this design. However, we strongly urge you

to consider donating to Airigami at www.papieravion.org. Airigami was established

so that the joy of airline modeling can be available to everybody. Please consider

making a donation of $5, $20, $50 or whatever you can to help keep Airigami alive

and, best of all, free.

INSTRUCTIONS

For instructions on how to build this model, refer to manual INSTRUCTIONS 3A

Airline designs and logos are reproduced for Fair Use educational and informational purposes.

All logos and designs remain the property of their respective copyright and trademark owners.

TEMPLATE

9GBOE20A01

Need help?

Do you have a question about the Airigami PAPIER AVION 9GBOE20A01 and is the answer not in the manual?

Summary

Boeing 727-200 Paper Model Components

Fuselage (FU)

The main body section of the Boeing 727-200 paper model.

Wing Box (WB)

The internal structure or box that forms the aircraft's wings.

Vertical Stabilizer (TV)

The vertical tail fin of the aircraft, crucial for stability.

Nose Landing Gear (NG)

The front landing gear assembly for the Boeing 727-200 model.

Port Underside Wing (WG2)

The lower section of the port (left) wing for the model.

Starboard Underside Wing (WG3)

The lower section of the starboard (right) wing for the model.

Upper Wing (WG1)

The upper surface of the aircraft's wings.

Wing Fairings (WF)

Fairings that connect the wings to the fuselage.

Engine Interiors (EI)

Detailed interior parts for the aircraft engines.

Engine Cowlings (EC)

The outer casing or covers for the aircraft engines.

Main Landing Gear (MG)

The primary landing gear assemblies located under the fuselage.

Printing Recommendations

Recommended Paper Stock

Guidance on the best paper types for printing the model sheets.

Assembly Instructions

Refer to Building Manual

Location of the detailed building manual for model construction.