To Next Page
P
Patricia ChavezAug 3, 2025
How to fix AIRLESSCO Sure Stripe 4550 when the engine will not start?
- EedunnAug 3, 2025
If your AIRLESSCO Construction Equipment engine won't start, first, ensure the engine switch is in the ON position. Then, check the fuel level and refill the gas tank if needed, referring to the engine manual for instructions. Also, verify the engine oil level and replenish if low, again consulting the engine manual. Confirm that the spark plug cable is securely connected and undamaged; reconnect or replace the spark plug if necessary. If the engine is cold, use the choke. Ensure the fuel shut-off lever is in the ON position. Lastly, if oil is seeping into the combustion chamber, remove the spark plug, pull the starter 3-4 times, clean or replace the spark plug, and then start the engine, keeping the striper upright to prevent further oil seepage.
General
